Happy Trails Part 18--San Elizario chapel

 My last stop in San Elizario was to the chapel. I couldn't go inside but I had picked up a photo/postcard in one of the gift shops so I could show the detail. The chapel is still in use and has a lovely mission style facade. 

I based this layout on a sketch but also wanted to use it for a challenge in my summer camp class. Our challenge was to use texture. The bottom strips are paper that has a textured look to them, but to up the ante a bit I also decided to add some 3D materials. I had some jute string and tied several knots along its length. Then I tied the ends together to make a loop and pasted it to the page. I drew a small cross (it's in the bottom left if you look closely) and is to simulate an old-fashioned rosary.

Happy Trails Part 17--San Elizario Law

First let me say HAPPY NEW YEAR! I've enjoyed the process of posting and describing my pages and I hope you have enjoyed the posts. Let me know if you want to see anything new this year or any way to improve the blog!

Now, back to San Elizario. There are still historic buildings in the town though many have been repurposed. The outsides still show the traditional stucco and wooden porticos. I apparently like to photograph the tunnel-like passageways. I didn't realize how many of them I had taken until I put this page together!

I based this layout on a sketch from my year-long scrapbook class. In March we were challenged to use banners on our pages and this certainly takes advantage of that challenge! I used up some older paper for the banners. The borders on top were left from a ranch/farm pack from Club Scrap. A couple of stickers on the first banner and some journaling was all that was needed to finalize this one.

One of the more intriguing stops in town is the old jail. This has been kept as a museum not because of who was confined here, but because one of those prisoners was sprung by Billy the Kid. If you ever are in the area, I do recommend stopping by for a few minutes to take it all in.

My pages were based on this layout on Pinterest. It enabled me to use up a bunch of scrap pieces. Everything is in the same brown-ish tones. The frame on the upper right is also a left-over from a project that I worked on. I originally thought I would use three of those frames on one page but they were too big. So I held on to this one and with a little cropping of the corners, it filled in nicely on the page. 

Happy Trails part 16--San Elizario Moseying

I wanted to take a moment to say Happy Holidays to all of my readers. This will post on Christmas night (prepared ahead of time of course) so I hope you are all celebrating in a safe and meaningful way with your friends and family. 

Saturday morning I had some free time so I decided to continue my exploration of the El Camino Real de Tierra Adentro by driving to a small town called San Elizario. There is a self-guided walking tour of the town showing some of the historic structures. It's a very small town but they are quite proud of their history and I stopped at just about all of the sites along their route. The first stop had to be for the stamp of course. It's in a small visitor center/museum and also had a small video to watch.

 This layout is based on a sketch from one of my classes that can't be shared. It is the same structure as the 1-2-3 layouts I've shared previously though. I used brown cardstock as a base and the barbed wire paper had the red/white stars on the back. Very quick cuts. I added a few embellishments from my western sticker stash--mostly little button type stickers.

Happy Trails part 13--Fort Selden

 After leaving the Farm and Ranch Museum, I headed to my next stop on the El Camino Real stamp path: Fort Selden. It was built around the time of the Civil War to provide safety and peace in the area. It must have worked because by 1895 it was no longer needed and was abandoned. Only remnants of the buildings remain.

The impetus for this layout is the border at the top of the left page. It was a pin I had saved on Pinterest. The paper is from an older CM line called "Reminisce"--one of my favorite lines. The tones and background designs work for so much of my travels. The letter block in the top left is supposed to say "US"--something I cut from my heritage Paper Loft word sheets. But I decided that a couple of judiciously placed dots would create U. S. and it worked perfectly!

Happy Trails Part 12--Blacksmithing

 The last entry for the Farm and Ranch Museum is the Blacksmith Shop. I also added the photos of the horses I took on my barn tour. 

Add caption

The layout is based on an older 1-2-3 sketch by Noreen Smith (May 2013). The concept is simple--use 4x6 blocks alternating with photos across the bottom and a title at the top. I varied that by making the left bottom all photos (evenly spaced). For the top row on the left, I had a photo paper with the horse face on it and I was able to cut it to 6x4--of course it's in the wrong direction but really--sketches are idea starters, so don't feel like you can't make an adjustment. I added a journal box and again spaced it so that there wasn't too much empty space on either side. The top is another photo paper from a farm/western pad I picked up. I cut it in half and placed the horseshoes across the top. The only thing left to fill was the cardstock fillers on the right. I cut a border sticker in half and layered it across the middle. That tied it all together. 

Happy Trails Part 11--Down on the Farm

After touring the main building I headed outside. There was another building specifically for the dairy industry and I took the opportunity to take a selfie of myself "milking" a cow.

The inspiration for this layout is from a sketch from my online scrapbook class so I can't show you. The theme was to use up the smaller cards/mats that are leftover from Project Life or from some of the mat packs that come with the Creative Memories kits. I did get to use 3 on this one: Top left was a mat from a farming page I bought. The "Dairy Barn" below it is actually a photo trimmed to the right size. On the right page, I used a piece of red gingham paper and added stickers to resemble a mat. Finally, I used a journaling box bottom right.

One of the highlights of visiting is a guided tour (in a golf cart!) of the outdoor exhibits. After the tour though you can walk back and look closer at the animals. Which I of course did!

This layout is from the same class as the first, but a different sketch. In this one, I did use one mat, but because of how I took my photos, I was able to cut them down to the mat size. The background papers are some that I've had for a while and never thought I'd find the right photos for a layout. The bright blue sky and fencing just seemed to pull this together though. I added the ribbon of bandana paper across the middle as an accent to break up the busy pattern. A few button stickers and cow stickers and the page was done quickly!

One more layout of the barnyard. There were so many different sheep, they got their own pages! I'm not completely sure I have them all labeled correctly but I tried!

This layout is based on the monthly 1-2-3 sketch from Noreen Smith which you can see on her blog. I used a piece of paper from the Painted Prairie pack (the special advisor-only pack I mentioned a few weeks ago). When I make the cuts for this page, I do it a little differently. Her first cut says to fold the paper in half and use scissors to cut along the fold. If you, like me, don't make the best free-hand cuts, and you don't mind a remnant fold in the paper, fold in half and then use your trimmer to cut from the long side through the point. You'll still get a 1/2 page triangle, it just has a crease in the middle. I'm ok with that though. 

For the sheep, I used an older CM punch that is a scalloped circle and another micro-flower punch to make the fluffy white components of the lambs. The faces are small ovals cut from black cardstock. The legs are using a Stampin' Up punch called "Word Window". I like that punch for so much more than title bars! The idea came from this Pinterest link. Sometimes it's fun to make objects from punches. Sometimes it's easier to just cut them from the Cricut though!

Happy Trails part 10--Back in the Saddle

 Another display in the museum focused on a local saddle maker who was quite famous for his intricate leather work. His tools were all arranged as if he were coming in to work on a piece. Several saddles were on display as well. One area was set aside for children to practice during supervised classes.

This layout was part of the Club Scrap Western kit. I bought that pack knowing that I had quite a few western theme trips to cover and the paisley background worked perfectly with the intricate saddle designs.

Happy Trails Part 9--At the Store

Continuing through the historic displays, I came to the General Store. I cannot imagine shopping by telling people what you wanted from behind the counter. I'm always impressed with the variety of every-day items that these displays are able to present: everything from kids' toys to food to weapons.

This layout was modeled after a page on my Pinterest Heritage site. The background paper is from a pack I purchased that had the historic theme to it. I added the clock, pram and teddy bear stickers from an old Creative Memories heritage sticker pack. The key and compass (as well as the word "Time") were already printed on the page. So don't forget--wallpaper can be augmented to achieve the look you want!

Happy Trails part 8--There's No Place Like Home

The next display continued with "everyday life" but switched to windmills and farmhouses. The display included both the inside and outside of the house which is rather unique. 

I made this layout during the CM Virtual Crop in June. You can see the sketch here. I used several papers in this layout. The denim blue is from a pack called Outdoor Blues. The plaid tan along the left and right sides are from some 10x12 CM paper (which tells you how old it is) and I don't remember the line. The inner stripes are from Painted Prairie (which seemed appropriate given the theme). The Painted Prairie paper is a special pack of just 6 sheets. CM makes them available to consultants 4 times a year. You can use them as incentives for your customers. Other decorations on this page are from the old "Day at the Farm" sticker pack from CM.

The next layout is more about the inside of the house. I liked the kitchen the best (as I usually do) and loved that this one included the canning jars. That brings back memories of helping my mom can tomatoes every summer.

I scraplifted this layout from an old CM blog post. While that blog page disappeared with the Old CM, I had pinned the image and understood the idea of using the tag punch to make the frill around a canning jar lid. The jar itself is just a rectangle of paper (this one from the old Earthy line) and a contrasting piece as the "label". The rim of the jar was a piece of a roll of decorative tape (the precursor to Washi tape) and I finally used it up! It really looks like a canning lid doesn't it? The gray doily was made using a special punch that will create circles with decorative edges. Two have been made so far--this one and a tulip border. They take 6" squares of paper and turn them into decorative mats. The "Home Cooking" and borders are from the Made with Love pack. Put all together, it's an historic kitchen from post to pictures!

Happy Trails part 7--On the Wagon

The museum moved into more recent history and featured a display of chuckwagon cooking. I used to watch competitions on TV among historic chuckwagons, so this caught my interest. 

This paper pack is S'mores and it worked perfectly to generate the rustic feel. I especially like the starry night paper as a background. I followed the sketch for the CM virtual crop again. The idea behind this layout was to create a border across the top. I did that by layering 3 different papers (the gingham, the blue speckle, and a red bandana paper) and then using the campfire punch to balance the edges. I cut the flames in both orange and yellow to create a more realistic flame. The title is from the S'more's theme pack. The wagon and the cowboy boot and hat on the journaling box are from some very old Day at the Ranch stickers from Creative Memories.

Below is a close-up of some of the vintage cookware on display and another old chuck wagon. 

I used a peekaboo pocket to add the last 2 photos without making a 2-page spread. I have a lot of ground to cover in this museum and wanted to save a little space.

Happy Trails Part 6--the historic home

Moving along the museum path, I encountered more murals and dioramas of everyday life. The recreated home was interesting to me, especially as I had to walk through the front door of the house to continue.

This page was created for one of my scrapbook classes. The theme of that month was to use our stash of photo and decorative mats to create a layout. So I chose 3 of my horizontal photos and 3 mats and arranged them to cover the page. The top left mat was my title, the middle one my journal box and the bottom left my embellishments. On that one I added the sun in the middle. It's a 3D die-cut from an older travel pack and came with pop-dots on the bottom.

As I entered the house, I was treated to the unusual hanging cradle and had to get closer to investigate.

This page is wallpaper. I thought the brown/gold tones matched the photos well. The arrow is a little brighter than I would have liked but it matched the title card from the opposite page, so I left it.

Happy Trails part 5--On the Trail of History

The next layout is still at the Farm and Ranch Museum. This is the display that pertains directly to the El Camino Real de Tierra Adentro. This display features ANOTHER cart used on the road--kind of amazing how many were found! To add to the display, the back wall was painted with a mural of everyday life. 

As I mentioned last week, the left page is the backside of a pocket page (the front holding the museum brochure). The layout is based on a sketch for the June 2020 virtual crop for Creative Memories. You can see the blog post here. While many people turned the 3 elements on the sides to small photos, I knew that I had to downsize the layout because of the size of the left page. So I chose to go with stacked circles (chosen because of the background paper). That left the middle for photos (and I never feel like I HAVE to use a vertical where they put a vertical place holder). The edges are a border maker basketweave. I thought based on the activities in the mural that it would be a good match.

Happy Trails Part 4--The Farm Museum

 My next stop for an El Camino Real stamp was the New Mexico Farm and Ranch Heritage Museum. This is a huge place with lots of interesting displays and we'll take the next month to go through it a bit at a time. Even though only one part deals with the El Camino Real, the rest is rather interesting.

The layout is another challenge from the Creative Memories Virtual Crop. You can see the blog post here. I chose a background paper from the Rustic Manor pack which has a photo of a barn door. I was able to keep the image present even though I added photos and other embellishments. One of the elements of the sketch is the set of mats under the photos. I chose a rather neutral color, but to give a little more definition, I punched the edges with one of the CM Border Maker System punches. It's called "Garland" and is one that leaves a stencil rather than cut shapes (as you saw in last week's page). I had a couple of cow stickers and die cuts and used some brown cardstock to set off the rest of the elements. The one thing that looks out of place is the sticker I wore for admission. I preserved that and wanted to add it to the page. Although the color is off, it does belong there.

I added this photo just to show you why this is a one-page layout for such a large museum. I wanted to include the Museum Guide in one of the Pocket Pages. The back of the pocket became the left page for the next layout. You'll see that next week.

Happy Trails Part 3--Crossing the Border

Friday morning, I continued my tour of the El Camino Real de Tierra Adentro. One of my first stops was just across the border of New Mexico at their Welcome Center. I was able to get a photo of the state welcome sign as well as information on the trail.

This layout is based on a sketch from the Creative Memories Virtual Crop. You can see it in this blog post. I used a piece of paper from the new Automobiles paper as well as some matching embellishments. There are really only 2 photos on this page. I liked that I could make everything fit the shapes to create the layout. The two right boxes are filled with paragraphs about the trail cut from a brochure. The bottom left box is a sticker from the collection mounted on 2 sheets of coordinating cardstock. I rounded the edges of the light tan cardstock to match the sticker. The middle bottom then became my journaling box. The top border is a pair of older cartridges from the CM Border Maker System. The bottom is the very early cartridge called Scallop Stitch. On top is the Rainbow punch. Both are doubled and meet in the middle to create one large border. To me, it looked like wheels.

Happy Trails Part 2: the History Museum

 After landing and checking into the hotel, I met up with one of my club friends and we went to the local museum (because there was a stamp there). We wandered through the displays for a little while. It's a nice enough museum but fairly small. The photo on the bottom right was taken digitally through an interactive wall at the front. It's one of the coolest features of the museum.

For the first layout, I thought I was using a sketch from my monthly class. I sort of did, except instead of opening the June layouts I opened January and so this repeats a sketch I had done previously. Still, the beauty of sketches is that they look different from changes to paper and photos. I had used this sketch for Christmas and it looks completely different! I can't show you the sketch because of the class rules. The papers I chose were some of the last remaining bits of the Creative Memories "Brave" pack. I hope they come out with something similar soon!

The stamp at the museum is from the El Camino Real de Tierra Adentro National Historic Trail (an affiliated part of the National Park Service). This translates loosely as the Royal Road. I'll be sharing more about this trail as I collected quite a few stops along the route. The museum had just one display piece connected with the trail--the rustic cart that would have been used to move goods from town to town. That wasn't the only thing we saw though--the museum has a nice eclectic set of antiques from the area.

This layout is a 1-2-3 sketch that you can see here. The paper I chose was one-sided and her sketches are made to get the most out of double-sided prints. So I chose some additional scraps in coordinating colors and used them to fill in for the 2nd side of the print design. The brown photo mats helped fill any gaps and are a nice contrast to the brochure and photos. The border on the far left page is made with the Creative Memories Border Maker System and the gears cartridge.

After the museum, we went to dinner. Our club has a newsletter called the Stamp Pad which had recently begun reader restaurant reviews in or near National Parks. One of them was for our convention area, and so we decided to give it a try! I agree with the review--great food, authentic atmosphere, and good pricing. I'd go back here anytime.

One of my few layouts that aren't inspired by someone else's. I chose to use paper from the "Made With Love" pack from Creative Memories. The paper had both a restaurant feel with the red gingham and the southwest feel with the bandana print in red and black. Just a couple of photo mats brought everything together. I liked the silverware stickers. It gives that photo a "placemat" feel.