Out of the fire

My last layout for the Meetup trip is of the final steps pouring the molten iron and revealing the finished product. We were a few rows back in the audience so it was hard to get good shots of the craftsmen pouring the liquid metal. They make very small batches now. I'm sure when the furnace was in full production the cauldrons were much larger. 

This layout is based on a free sketch I got from Club Scrap. Due to COVID 19, the Lancaster Scrapbook Convention was transitioned to virtual. We were sent to this website for the directions (there's a video as well) but we had to supply our own papers. I chose a piece of textured paper that looked like rusted metal from the Creative Memories Timeworn paper pack. I added a sheet of cardstock called "Copper". I was hoping it was a shimmery paper but it ended up just looking dull green. If you look at the website, the sample pages have a LOT more photos, even putting small photos in the four squares across the top right page. I didn't have many photos left of the day so I spread them around and filled some of the remaining blocks with stickers and journal boxes. The frame around the 4x4 photo on the left page is from the Memoirs and Memories embellishment kit.

Casting begins

During our time at Hopewell Furnace, we got to walk through several areas demonstrating the production of iron pieces. The left page focuses on the creation of heat. Water runs over a wheel which pumps a bellows. That pushes air into the furnace to increase the heat. In the photo below, I'm listening to the rush of air through the pipe as it heads to the furnace. On the right we watched re-enactors preparing a mold to be cast. It was just like when I was in metal shop in high school!

I made this page as I took a "Summer Camp" class for scrapbooking. The week's challenge was to take one of our punches and turn it into a stamp. I used the Medallion punch on a styrofoam plate and then secured that to a wooden block leftover from our stamping days. I did not re-ink the stamp each time I pressed down. This enabled me to get gradations of the image. The styrofoam was thin so you can see that I inadvertently inked the block and that showed up on the page as well. I used metal designed stickers and die cuts to finish the page. 

The best memories are made on the farm

Hopewell Furnace ran in a time when everyone kept their own farm animals--sheep for wool or meat, chickens for eggs, and horses to pull wagons. That life is kept alive today and we enjoyed visiting all the animals during our tour.

I'm 95% certain that I used a sketch for this layout. However, I cannot figure out where I got it. So if you recognize it, please let me know so I can give credit. The papers are from the very old "Discover" line from Creative Memories. I like it because it has a very rural or rustic feel to it. The distressed elements--faded edging, light tarnish accents--seem to fit with the farm life. Added to the page are some animal stickers which are also older CM. The borders at the tops of both pages are from a non-CM source. I found a few other companies with packs of farm-theme papers and stickers. And the tones matched the Discover theme well. 

Making charcoal

 The reason for our meetup was the demonstration of making charcoal. This process was done on a much larger scale, and every day, when the site functioned as a furnace. Now they have special demonstrations twice a year. The people who work the site in period clothing attended (I realized later who they were) and gave an element of reality to the event. The sign about fire being hot made me chuckle though.

I follow several other scrapbooking blogs and this one had a page I wanted to try. I didn't sign up for the boot camp, but this layout follows the half-page technique displayed. It is 1 piece of decorative paper cut in half and spread on 2 pages, then one piece of cardstock cut into specific strips. I did have to use another piece of cardstock to punch the rustic fence border across the bottom but all of the mats and the 2 thin strips along the paper are from one sheet of cardstock. The CM 12" trimmer has a measurement line on the side of the cutting blade and that helps to be able to make the cuts to get four 4.25x6.25 inch mats. 

My First Meet-up

 My next journey was not long after returning from Chamizal. It was special in its own way though because the National Park Travelers Club had recently developed a Meet-up program to encourage people to visit the parks together. We would receive a special meet-up stamp, as well as the park stamp, and both would count toward our yearly tallies. Vanessa put this one together on a weekend where Hopewell Furnace was doing a program on charcoal making. It was the fuel needed when the furnace was running daily--1800s. The buildings were renovated and recreated to be authentic to when this was a booming business.

I made this page for the July 2022 CM Virtual Crop. You can see the sketch on this page. I used an old piece of Discover(I think) CM paper. Since the border was pre-made I just had to fill in with photos and make a border at the bottom. I chose 2 pieces of CM Shortcuts. These were packs of decorative borders in various cardstock colors. The 2 I picked ended up looking like mountains and a fence and that worked well with the rustic feel of the photos. The middle embellishment is a flower from an old heritage pack. This came together quickly with the patterned paper!

Happy Trails part 23--the Final Entry

 The last of my trip was a night-time visit to Carlsbad Caverns. While I can certainly count this as a unit visited I did not arrive early enough to visit the caves. I was able to tour the visitor center and then head to the Amphitheater for the Bat Flight presentation. Our club snagged several rows together and we had fun calling to the newcomers at the top of the staircase. My husband still can't believe I attended this event because I tend to freak out when a bat flies in the house. Luckily none tangled in my hair that night! There are only daytime photos because phones, cameras, and other electrical devices are prohibited once the bats start emerging from the caves.

In a rather unusual burst of enthusiasm, I completed this page a little earlier than normal. One of the Facebook pages I followed showed how to make the bats--from an Airplane Border Maker Cartridge! They are punched from black paper, turned upside down, and embellished with a white gel pen for the eyes. I knew I just HAD to make the page right then (it was October 2018 and I was still a couple of years away from completing the album). So it's been sitting in one of my pre-made page containers waiting until I got to this album. Because I made it so far in advance, I used cardstock as the base. I found 2 close shades in the yellow/orange family. Then I took one sheet of stone paper from the CM Textures pack and cut it to make the non-symmetrical layout. I made 3 12" strips of "bats" and layered them across the middle. A few bat stickers and die cuts from my Halloween collection helped create the bat flight across the page.

I was having trouble getting all the photos on the page so I used a peekaboo pocket on the photo above the park brochure. If you lift it, the journaling is underneath. Hindsight is 2020. I didn't realize when I made this that it would be the last page in the album. Had I been planning it out, I would have rearranged the layout to make 3 pages with the last of the photos as the final entry. 

And that leads us to the final page. I struggled with what to put on the page but finally found inspiration in making a closing page similar to my kick-off pages. I used the "Happy Trails" theme to say goodbye and to talk a little about the upcoming convention in Philadelphia. (That set of pages has been covered if you look back through the blog posts).

Once I decided what I was doing, this page came together quickly. I had a western themed photo page with the hat and hay bale. I used the Cricut to make the Happy Trails sign and the letters to indicate the next trip. I may use this technique again!

Happy Trails part 22--Guadalupe Mountains

After the ranger talk, I headed outside the city to the Guadalupe Mountains. The club had arranged for a portion of the park to be open that is typically difficult to visit. Before we get there, let's look at the approach and the imposing El Capitan mountain. I had just obtained a new cell phone and people had told me that it wouldn't get very good photos. However, my image of El Capitan is amazing. Or perhaps the mountain just doesn't take a bad picture! I did visit the visitor center and then returned to the scenic pull-off to grab this shot. It was worth it! 

These were 2 very simple pages to put together. On the left, I combined 2 papers: the background paper from Scrapbook Customs with the state image and name of the park and the overlay that I purchased at the Lancaster Scrapbook convention. Those 2 created the perfect backdrop for my photo of the entrance sign and the park brochure. Now I did wonder about putting the name of the park on the page 3 times, but I suppose it is a variety of ways to display it and I am leaving it that way. On the right, I started with a Fast-to-Fabulous from an earlier travel pack. It has a nice large opening in the middle and just a hint of borders. That was a great place for me to put a journal box and my excellent picture of El Capitan. The border on the right is from the Eastern National scrapbook kit and while it is greener than the trip to Guadalupe, it is not all incorrect! They were paved roads on the way, but JUST.

My other stop in the park was at the Frijole ranch--a historic homestead turned into a museum. The club had arranged for rangers to staff a table for questions but the tour was self-guided. This ranch is not frequently opened so I'm grateful that we were able to visit when we did. I know I need to return to the park and do some trails but I won't have to worry about seeing the ranch again. There is a small trail leading away from the ranch which has great flowers but I didn't have time to see much of it.

The papers on this layout are from the BoBunny line called Paparazzi. It has a great historic feel to it. I picked it up at a yardsale. An entire Iris case for just $5--including the case! The only downside is there is a heavy perfume smell to the case. The case included papers as well as a 6x6 decorative mat tablet and that's what I used on the bottom left and top right to highlight a few photos. The camera die cut is also from that pack. A title bar from one of the pages highlighted the top left page. Another quick layout!